usage: sccli [options] device [command]
Valid options:
-d disk, --disk=cXtYdZ
select LVD single-bus JBOD enclosure containing specified disk
-h, --help, --usage
display valid commands
-l, --list
display a list of local StorEdge 3000 devices
-n, --no
assume a "no" response to any prompts
-o, --oob
use an out-of-band (network) connection to the specified device
-v, --version
display program version information
-w <password>, --password <password>
specify the password for the array controller
-y, --yes
assume a "yes" response to any prompts
Valid commands:
about
display program version and copyright info
check parity { ld<index> | <LD-ID> }
check parity on specified logical drive
clear events
clear the event log
configure channel <ch> {host|drive} [{pid|sid} <target-list>] [--reset]
configure a host or drive channel
configure global-spare <disk>
configure a disk as a global spare
configure local-spare <disk> <logical-drive>
configure a disk as a local spare for a specific logical drive
configure network-interface lan0 [options]
set network interface parameters
configure partition <partition-id> [<size> | delete]
configure a logical drive partition of the specified size
create logical-volume <logical-drives> [primary|secondary]
create a logical volume over the specified LDs
create logical-drive <raid-level> <disk-list> [<options>]
Create a logical disk device
create host-wwn-name <wwn> <name> [{head | tail}]
assign a symbolic name to a host WWPN
delete logical-drive <ld>
Delete a logical drive
delete logical-volume <lv-list>
Delete one or more logical volumes
delete host-wwn-name [<wwn> | <name>]
delete a Host-ID/WWN name assignment
download controller-configuration [-r|--reset] [-b|--build] <file>
download array controller binary configuration
download controller-firmware [--reset] <firmware> [<bootrecord>]
download array controller firmware (optionally w/ hard reset)
download disk-firmware <filename> <product-id>
download disk drive firmware to internal drives
download pld-firmware <filename>
download enclosure PLD firmware
download safte-firmware [-f] <filename>
download enclosure SAFTE firmware
download ses-firmware <filename>
download enclosure SES firmware
download nvram [-r] <file>
download array controller binary nvram
fail {primary|secondary}
fail a controller in a redundant controller pair
help
display help for commands
map <partition> <ch>.<tgt>.<lun> [wwpn | host-id]
map an LD or LV partition to a host channel/target/lun
mute
silence the enclosure alarm
password
specifies the array controller password
quit
exit the program
reset controller
reset the array controller
reset nvram
restore nvram to factory defaults
select
specify a storage device to monitor or configure
set cache-policy [write-through|write-back|sequential|random]
set cache write-behind and optimization policy
set controller-name <string>
set the controller name
set drive-parameters <param> <value>
set drive channel parameters
set host-parameters <param> <value>
set host channel parameters
set inter-controller-link {upper|lower} channel <ch> [dis]connected
enable/disable per-channel inter-controller-link
set led disk <ch>.<id> { on | off }
set led state for drive slot in RAID enclosure
set led disk <diskname> { on | off }
set led state for drive in JBOD enclosure
set led slot <slot> { on | off }
set led state for slot in specified JBOD enclosure
set password <string>
set the controller password
set rs232-configuration <port> <speed>
set the RS232 interface baud rate
set unique-identifier <value>
set the subsystem's 6-digit hexadecimal serial number
show battery-status
display status of backup battery
show bypass device ses-channel <ch> loop <loopa|loopb>
displays the target IDs on a specified loop that are currently bypassed
show bypass sfp ses-channel <ch> loop <loopa|loopb>
displays the target IDs on a specified loop that are currently bypassed
show bypass raid
displays raid drive channel bypass status
show cache-policy
display cache policy
show channels
display channel configuration
show configuration [--xml | -x] [<filename>]
display the device's configuration or save to file
show controller-name
display controller name
show disks
display info for array disks.
show drive-parameters
display drive parameters
show enclosure-status
display the status of internal chassis components
show events [last <n>]
display the controller event log.
show FRUs
display FRU-ID information
show host-parameters
display host i/o parameters
show host-wwn-names
display host-wwn/name list
show inquiry-data
display SCSI INQUIRY data for selected device.
show inter-controller-link {upper|lower} channel <ch>
display status of inter-controller link on specified channel
show ip-address
display the controller's IP network address
show led disk <ch>.<id>
show led state for drive slot in RAID enclosure
show led disk <diskname>
show led state for drive in JBOD enclosure
show led slot <slot>
show led state for slot in specified JBOD enclosure
show logical-drives [<logical-drive-list>]
display logical drives
show loop-map channel <ch> [target <id>]
display the fibre channel loop positional map for a given channel
show logical-volumes [<logical-volume-list>]
display logical volumes
show lun-maps
display lun maps for host channels
show network-parameters
display controller network parameters
show partitions [logical-volume <lv> | logical-device <ld>]
display partitions of logical drives
show pld-revision
display PLD revision of directly-connected FC expansion chassis
show port-wwns
display host channel FC Port_Name WWNs
show redundancy-mode
display redundancy status
show rs232-configuration
display serial port configuration
show safte
display status of SAF-TE devices
show ses
display status of SES devices
show shutdown-status
display status of controller shutdown
show unique-identifier
display subsystem 6-digit unique identifier
shutdown controller
shut down controller (prepare for power off)
shutdown logical-drive <ld>
shut down (force offline) a logical drive
unconfigure {local-spare|global-spare} <disk> [<logical-drive>]
unconfigure a local or global spare drive
unfail
restore (deassert) a failed controller
unmap {<partition> [<ch>] | {<ch>.<tgt>.<lun> [wwpn | host-id]}}
unmap an LD or LV partition from a host channel/target/lun
upload controller-configuration <file>
upload array controller binary configuration
upload nvram <file>
upload array controller binary nvram
version
display program version
Valid options:
-d disk, --disk=cXtYdZ
select LVD single-bus JBOD enclosure containing specified disk
-h, --help, --usage
display valid commands
-l, --list
display a list of local StorEdge 3000 devices
-n, --no
assume a "no" response to any prompts
-o, --oob
use an out-of-band (network) connection to the specified device
-v, --version
display program version information
-w <password>, --password <password>
specify the password for the array controller
-y, --yes
assume a "yes" response to any prompts
Valid commands:
about
display program version and copyright info
check parity { ld<index> | <LD-ID> }
check parity on specified logical drive
clear events
clear the event log
configure channel <ch> {host|drive} [{pid|sid} <target-list>] [--reset]
configure a host or drive channel
configure global-spare <disk>
configure a disk as a global spare
configure local-spare <disk> <logical-drive>
configure a disk as a local spare for a specific logical drive
configure network-interface lan0 [options]
set network interface parameters
configure partition <partition-id> [<size> | delete]
configure a logical drive partition of the specified size
create logical-volume <logical-drives> [primary|secondary]
create a logical volume over the specified LDs
create logical-drive <raid-level> <disk-list> [<options>]
Create a logical disk device
create host-wwn-name <wwn> <name> [{head | tail}]
assign a symbolic name to a host WWPN
delete logical-drive <ld>
Delete a logical drive
delete logical-volume <lv-list>
Delete one or more logical volumes
delete host-wwn-name [<wwn> | <name>]
delete a Host-ID/WWN name assignment
download controller-configuration [-r|--reset] [-b|--build] <file>
download array controller binary configuration
download controller-firmware [--reset] <firmware> [<bootrecord>]
download array controller firmware (optionally w/ hard reset)
download disk-firmware <filename> <product-id>
download disk drive firmware to internal drives
download pld-firmware <filename>
download enclosure PLD firmware
download safte-firmware [-f] <filename>
download enclosure SAFTE firmware
download ses-firmware <filename>
download enclosure SES firmware
download nvram [-r] <file>
download array controller binary nvram
fail {primary|secondary}
fail a controller in a redundant controller pair
help
display help for commands
map <partition> <ch>.<tgt>.<lun> [wwpn | host-id]
map an LD or LV partition to a host channel/target/lun
mute
silence the enclosure alarm
password
specifies the array controller password
quit
exit the program
reset controller
reset the array controller
reset nvram
restore nvram to factory defaults
select
specify a storage device to monitor or configure
set cache-policy [write-through|write-back|sequential|random]
set cache write-behind and optimization policy
set controller-name <string>
set the controller name
set drive-parameters <param> <value>
set drive channel parameters
set host-parameters <param> <value>
set host channel parameters
set inter-controller-link {upper|lower} channel <ch> [dis]connected
enable/disable per-channel inter-controller-link
set led disk <ch>.<id> { on | off }
set led state for drive slot in RAID enclosure
set led disk <diskname> { on | off }
set led state for drive in JBOD enclosure
set led slot <slot> { on | off }
set led state for slot in specified JBOD enclosure
set password <string>
set the controller password
set rs232-configuration <port> <speed>
set the RS232 interface baud rate
set unique-identifier <value>
set the subsystem's 6-digit hexadecimal serial number
show battery-status
display status of backup battery
show bypass device ses-channel <ch> loop <loopa|loopb>
displays the target IDs on a specified loop that are currently bypassed
show bypass sfp ses-channel <ch> loop <loopa|loopb>
displays the target IDs on a specified loop that are currently bypassed
show bypass raid
displays raid drive channel bypass status
show cache-policy
display cache policy
show channels
display channel configuration
show configuration [--xml | -x] [<filename>]
display the device's configuration or save to file
show controller-name
display controller name
show disks
display info for array disks.
show drive-parameters
display drive parameters
show enclosure-status
display the status of internal chassis components
show events [last <n>]
display the controller event log.
show FRUs
display FRU-ID information
show host-parameters
display host i/o parameters
show host-wwn-names
display host-wwn/name list
show inquiry-data
display SCSI INQUIRY data for selected device.
show inter-controller-link {upper|lower} channel <ch>
display status of inter-controller link on specified channel
show ip-address
display the controller's IP network address
show led disk <ch>.<id>
show led state for drive slot in RAID enclosure
show led disk <diskname>
show led state for drive in JBOD enclosure
show led slot <slot>
show led state for slot in specified JBOD enclosure
show logical-drives [<logical-drive-list>]
display logical drives
show loop-map channel <ch> [target <id>]
display the fibre channel loop positional map for a given channel
show logical-volumes [<logical-volume-list>]
display logical volumes
show lun-maps
display lun maps for host channels
show network-parameters
display controller network parameters
show partitions [logical-volume <lv> | logical-device <ld>]
display partitions of logical drives
show pld-revision
display PLD revision of directly-connected FC expansion chassis
show port-wwns
display host channel FC Port_Name WWNs
show redundancy-mode
display redundancy status
show rs232-configuration
display serial port configuration
show safte
display status of SAF-TE devices
show ses
display status of SES devices
show shutdown-status
display status of controller shutdown
show unique-identifier
display subsystem 6-digit unique identifier
shutdown controller
shut down controller (prepare for power off)
shutdown logical-drive <ld>
shut down (force offline) a logical drive
unconfigure {local-spare|global-spare} <disk> [<logical-drive>]
unconfigure a local or global spare drive
unfail
restore (deassert) a failed controller
unmap {<partition> [<ch>] | {<ch>.<tgt>.<lun> [wwpn | host-id]}}
unmap an LD or LV partition from a host channel/target/lun
upload controller-configuration <file>
upload array controller binary configuration
upload nvram <file>
upload array controller binary nvram
version
display program version