다음의 panic 메시지들은 하드웨어와 관련된 메시지들이다.
-------------------------------------------------------------------
- Async Memory Fault
- Async data error at tl1
- Memory error
- Panics with mmu_sfsr > 3 digits
- ECC Memory Error
vmunix: fatal system fault:
vmunix: Uncorrectable ECC Memory Error.
vmunix: Uncorrected SIMM at: E#0:U2208
vmunix: Physical Address = 0:70aba7f8
vmunix: Control Registers:
vmunix: sfsr = 0x13b6, write fault at vaddr 0xffaab7f8
vmunix: panic on cpu 0: memory error
- Bad module/chip at ##
unix: DVMA Parity Error, ctx = 0x0, virt addr = 0xfff23980
unix: pme = e20010bd, phys addr = 10bd980
unix: Async Error Register 211<DVMAERR,MULTIPLE> size = 2
unix: Parity Error Register d2<ERROR,MULTI,CHECK,ERR16>
unix: bad module/chip at: U310
unix: System operation cannot continue, will test location anyway.
unix: parity error at 10bd980 is transient.
unix: panic: dvma parity error
- E-cache Parity Error
panic[cpu#]/thread=0x##: ECache Parity Error.
- Uncorrectable ECC Parity Error
panic: SBus0 UE P.Error DMA read: AFSR 0x4000fbe0 00000000 AFAR
0x00000000 10493c00 SIMM U0602 Id
- UE Error
Solaris 2.5 and 2.5.1: CPU# Priv. UE Error:
Later releases: CPU# Privileged UE Error:
Bad cpu or bad SIMM;
- Illegal instruction (but the instruction was legal)
panic[cpu#]/thread=0x##: trap
Illegal Instruction
- send_mondo: time-out (target 0xn) (n is a CPU, target CPU is bad)
WARNING: cpuid 0x# failed to stop
panic[cpu#]/thread=0x##: send_mondo: timeout (target 0x#)
[211 NACK, 1 BUSY]
syncing file systems...
- panic[cpux]: WAIT_MBOX_DONE() timeout, recv_cpuset 0xyyy, xc cpuset 0xzzz
- Watchdog Reset (most)
- fault in srmmu_tlbflush() (usually a bad CPU)
---------------------------------------------------------------------------
다음의 메시지들은 /var/adm/messages에 나타나는 메시지들로 panic 메시지는 아니지만 하드웨어적인 문제에 나타나는 메시지들이다.
- Booting after fatal error FATAL
unix: System booting after fatal error FATAL
- SCSI errors (assuming current I/O-related patches are installed)
- Timeout
unix: WARNING:
/io-unit@f,e0200000/sbi@0,0/QLGC,isp@0,10000/sd@0,0 (sd15):
unix: SCSI transport failed: reason 'timeout': giving up
- Reset
unix: WARNING:
/io-unit@f,e1200000/sbi@0,0/QLGC,isp@2,10000/sd@5,0 (sd72):
unix: SCSI transport failed: reason 'reset': retrying command
- Phase parity
unix: WARNING:
/io-unit@f,e0200000/sbi@0,0/dma@0,81000/esp@0,80000 (esp0):
unix: unexpected data phase: current esp state:
unix: unexpected data phase: current esp state:
unix: esp: State=DATA Last State=UNKNOWN
unix: esp: Latched stat=0x90<IPND,XZERO> intr=0x18<BUS,FCMP> fifo 0x80
-------------------------------------------------------------------
- Async Memory Fault
- Async data error at tl1
- Memory error
- Panics with mmu_sfsr > 3 digits
- ECC Memory Error
vmunix: fatal system fault:
vmunix: Uncorrectable ECC Memory Error.
vmunix: Uncorrected SIMM at: E#0:U2208
vmunix: Physical Address = 0:70aba7f8
vmunix: Control Registers:
vmunix: sfsr = 0x13b6, write fault at vaddr 0xffaab7f8
vmunix: panic on cpu 0: memory error
- Bad module/chip at ##
unix: DVMA Parity Error, ctx = 0x0, virt addr = 0xfff23980
unix: pme = e20010bd, phys addr = 10bd980
unix: Async Error Register 211<DVMAERR,MULTIPLE> size = 2
unix: Parity Error Register d2<ERROR,MULTI,CHECK,ERR16>
unix: bad module/chip at: U310
unix: System operation cannot continue, will test location anyway.
unix: parity error at 10bd980 is transient.
unix: panic: dvma parity error
- E-cache Parity Error
panic[cpu#]/thread=0x##: ECache Parity Error.
- Uncorrectable ECC Parity Error
panic: SBus0 UE P.Error DMA read: AFSR 0x4000fbe0 00000000 AFAR
0x00000000 10493c00 SIMM U0602 Id
- UE Error
Solaris 2.5 and 2.5.1: CPU# Priv. UE Error:
Later releases: CPU# Privileged UE Error:
Bad cpu or bad SIMM;
- Illegal instruction (but the instruction was legal)
panic[cpu#]/thread=0x##: trap
Illegal Instruction
- send_mondo: time-out (target 0xn) (n is a CPU, target CPU is bad)
WARNING: cpuid 0x# failed to stop
panic[cpu#]/thread=0x##: send_mondo: timeout (target 0x#)
[211 NACK, 1 BUSY]
syncing file systems...
- panic[cpux]: WAIT_MBOX_DONE() timeout, recv_cpuset 0xyyy, xc cpuset 0xzzz
- Watchdog Reset (most)
- fault in srmmu_tlbflush() (usually a bad CPU)
---------------------------------------------------------------------------
다음의 메시지들은 /var/adm/messages에 나타나는 메시지들로 panic 메시지는 아니지만 하드웨어적인 문제에 나타나는 메시지들이다.
- Booting after fatal error FATAL
unix: System booting after fatal error FATAL
- SCSI errors (assuming current I/O-related patches are installed)
- Timeout
unix: WARNING:
/io-unit@f,e0200000/sbi@0,0/QLGC,isp@0,10000/sd@0,0 (sd15):
unix: SCSI transport failed: reason 'timeout': giving up
- Reset
unix: WARNING:
/io-unit@f,e1200000/sbi@0,0/QLGC,isp@2,10000/sd@5,0 (sd72):
unix: SCSI transport failed: reason 'reset': retrying command
- Phase parity
unix: WARNING:
/io-unit@f,e0200000/sbi@0,0/dma@0,81000/esp@0,80000 (esp0):
unix: unexpected data phase: current esp state:
unix: unexpected data phase: current esp state:
unix: esp: State=DATA Last State=UNKNOWN
unix: esp: Latched stat=0x90<IPND,XZERO> intr=0x18<BUS,FCMP> fifo 0x80