로그인
Sign in
Seagate disk ST340824A is detected as a 5.77GB disk, it should be approximately
40GB.

# format
AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <ST340824A cyl 19156 alt 2 hd 15 sec 255>
       /pci@1f,0/ide@d/dad@0,0
    1. c0t2d0 <ST340824A cyl 12007 alt 2 hd 16 sec 63>
       /pci@1f,0/ide@d/dad@2,0

The above is an example of a disk (c0t0d0) showing the correct size and a disk
(c0t2d0) showing an incorrect size.            
SOLUTION SUMMARY:

Using the Solaris (TM) Operating Environment format utility, select the problem disk -> type -> other. Then change the disk geometry to the following:

Cyl -> 19156 Alt -> 2 Hd -> 16 Sec -> 255


The steps to change the disk geometry follow:

# format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

0. c0t0d0 <ST340824A cyl 19156 alt 2 hd 15 sec 255>

/pci@1f,0/ide@d/dad@0,0

1. c0t2d0 <ST340824A cyl 12007 alt 2 hd 16 sec 63>

/pci@1f,0/ide@d/dad@2,0


Specify disk (enter its number): 1

selecting c0t2d0

[disk formatted]

FORMAT MENU:

disk - select a disk

type - select (define) a disk type

partition - select (define) a partition table

current - describe the current disk

format - format and analyze the disk

repair - repair a defective sector

label - write label to the disk

analyze - surface analysis

defect - defect list management

backup - search for backup labels

verify - read and display labels

save - save new disk/partition definitions

inquiry - show vendor, product and revision

volname - set 8-character volume name

!<cmd> - execute <cmd>, then return

quit

format> type

AVAILABLE DRIVE TYPES:

     0. Auto Configure
     1. Seagate ST340824A
     2. Other
Specify disk type (enter its number)[1]: 2
Enter number of data cylinders: 19156
Enter number of alternate cylinders[2]:
Enter number of physical cylinders[1868]:
Enter number of heads: 16
Enter physical number of heads[default]:
Enter number of data sectors/track: 255
Enter number of physical sectors/track[default]:
Enter rpm of drive[default]:
Enter format time[default]:

  < accept default to all remaining questions >

Enter disk type name (remember quotes): "Sun_40GB"
Selecting c0t0d0
format> quit                      
At this point the disk should be seen as a 40GB disk.


조회 수 :
677
추천 수 :
15 / 0
등록일 :
2003.12.13
16:49:36 (*.193.52.140)
엮인글 :
http://bestceok.com/xe/index.php?mid=sun_faq&document_srl=2951&act=trackback&key=5f0
게시글 주소 :
http://bestceok.com/xe/index.php?mid=sun_faq&document_srl=2951
List of Articles
번호 제목 글쓴이 날짜 조회 수
91 Solaris Network Installation (JumpStart) 하록 2003-12-13 492
90 Solaris Patch Install 하록 2003-12-13 473
89 디스크 관리하기.. 하록 2003-12-13 495
88 새 하드 디스크 추가 하록 2003-12-13 687
87 A5200을 다른 호스트로 옮길때 하록 2003-12-13 466
86 T3를 모니터링 방법(syslog) 하록 2003-12-13 493
85 T3 IP address setting 하록 2003-12-13 476
84 console login: ^J^M^Q^K^K^P 하록 2003-12-13 466
83 Hardware panic strings 하록 2003-12-13 757
82 Meta Device 복구하기 하록 2003-12-13 729
81 Slow all SCSI ports to asynchronous operation. 하록 2003-12-13 504
80 Troubleshooting System Hangs 하록 2003-12-13 671
79 SUN Fire X800 Firmware upgrade 하록 2003-12-13 887
78 Voulme manager 사용하는 A5x00 array disk fail시 disk 교체 방법 하록 2003-12-13 753
77 samba 설치 하록 2003-12-13 598
76 사용자 추가 하록 2003-12-13 438
75 자동백업결과를 E-mail로 알려주는 스크립트 하록 2003-12-13 439
74 Anonymous FTP 서버 만들기 하록 2003-12-13 549
» Ultra10에서 Seagate 40GB HDD(ST34082A)가 5.77GB로 인식될 때 하록 2003-12-13 677
72 crontab 사용법 하록 2003-12-13 547